Antimicrobial and Photoantimicrobial Activities of Chitosan/CNPPV Nanocomposites.

Multidrug-resistant bacteria represent a global health and economic burden that urgently calls for new technologies to combat bacterial antimicrobial resistance. Here, we developed novel nanocomposites (NCPs) based on chitosan that display different degrees of acetylation (DAs), and conjugated polymer cyano-substituted poly(p-phenylene vinylene) (CNPPV) as an alternative approach to inactivate Gram-negative (E. coli) and Gram-positive (S. aureus) bacteria. Chitosan's structure was confirmed through FT-Raman spectroscopy. Bactericidal and photobactericidal activities of NCPs were tested under dark and blue-light irradiation conditions, respectively. Hydrodynamic size and aqueous stability were determined by DLS, zeta potential (ZP) and time-domain NMR. TEM micrographs of NCPs were obtained, and their capacity of generating reactive oxygen species (ROS) under blue illumination was also characterized. Meaningful variations on ZP and relaxation time T2 confirmed successful physical attachment of chitosan/CNPPV. All NCPs exhibited a similar and shrunken spherical shape according to TEM. A lower DA is responsible for driving higher bactericidal performance alongside the synergistic effect from CNPPV, lower nanosized distribution profile and higher positive charged surface. ROS production was proportionally found in NCPs with and without CNPPV by decreasing the DA, leading to a remarkable photobactericidal effect under blue-light irradiation. Overall, our findings indicate that chitosan/CNPPV NCPs may constitute a valuable asset for the development of innovative strategies for inactivation and/or photoinactivation of bacteria.

Chitosan effects on monolayers of zwitterionic, anionic and a natural lipid extract from E. coli at physiological pH.

Langmuir monolayers are used to simulate the biological membrane environment, acting as a mimetic system of the outer or the inner membrane leaflet. Herein, we analyze the interaction of membrane models with a partially N-acetylated chitosan (Ch35%) possessing a quasi-ideal random pattern of acetylation, full water solubility up to pH ≈ 8.5 and unusually high weight average molecular weight. Lipid monolayers containing dipalmitoyl phosphatidyl choline (DPPC), dipalmitoyl phosphatidyl ethalonamine (DPPE), dipalmitoyl phosphatidyl glycerol (DPPG) or E. coli total lipid extract were spread onto subphases buffered at pH 4.5 or 7.4. The incorporation of Ch35% chitosan caused monolayer expansion and a general trend of decreasing monolayer rigidity with Ch35% concentration. Due to its relatively high content of N-acetylglucosamine (GlcNAc) units, Ch35% interactions with negatively charged monolayers and with E. coli extract were weaker than those involving zwitterionic monolayers or lipid rafts. While the smaller interaction with negatively charged lipids was unexpected, this finding can be attributed to the degree of acetylation (35%) which imparts a small number of charged groups for Ch35% to interact. Chitosan properties are therefore determinant for interactions with model cell membranes, which explains the variability in chitosan bactericide activity in the literature. This is the first study on the effects from chitosans on realistic models of bacterial membranes under physiological pH.

Enhanced chitosan effects on cell membrane models made with lipid raft monolayers.

Langmuir monolayers have been used as cell membrane models, where lipid composition is normally varied to mimic distinct types of membranes. For eukaryotic membranes, for instance, rather than using only zwitterionic phospholipids there is now a trend to employ mixtures to simulate the lipid rafts known to be relevant for various cellular processes. In this study, we demonstrate that effects from chitosans on Langmuir monolayers are considerably higher if lipid raft compositions (ternary mixtures of dipalmitoyl phosphatidyl choline (DPPC), sphingomyelin (SM) and cholesterol) are used. Significantly, measurable effects on the surface pressure isotherms start at 10-6 mg mL-1 for chitosans in lipid rafts, to be compared with 10-2 mg mL-1 for neat dipalmitoyl phosphatidylcholine (DPPC). This applies to both a commercial chitosan and chitosans soluble at physiological pH. Incorporation of these chitosans in the raft monolayers was confirmed in polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) experiments, where both the tail groups and headgroups were found to interact with chitosan. Since the effects on membrane models may be observed at such small concentrations for chitosans and probably other molecules, some studies may have to be revisited where neat phospholipids should be replaced by lipid raft compositions.

Biotransformation of (E)-2-Methyl-3-Phenylacrylaldehyde Using Mycelia of Penicillium citrinum CBMAI 1186, Both Free and Immobilized on Chitosan.

This study applied the use of marine-derived fungus Penicillium citrinum CBMAI 1186 in the stereoselective reduction of the C=C double bond of the prochiral (E)-2-methyl-3-phenylacrylaldehyde 1. The fungus immobilized on chitosan, obtained by multistep ultrasound-assisted deacetylation process (Ch-USAD), produced the (S)-(+)-2-methyl-3-phenylpropan-1-ol 3 (c = 49%, 40% ee) isomer and (±)-2-methyl-3-phenylacrilic acid 4 (c = 35%); in contrast, immobilized mycelia on commercial chitosan (Ch-C) yielded the (S)-(+)-2-methyl-3-phenylpropan-1-ol 3 (c = 48%, 10% ee) and (±)-2-methyl-3-phenylpropanal 1a (c = 41%). The reaction using free mycelia gave a 40% yield of (S)-(+)-2-methyl-3-phenylpropan-1-ol 3 with 10% ee. These results showed that the crystallinity form and molecular weight of chitosan (Ch-C or Ch-USAD) used to immobilized mycelia of P. citrinum CBMAI 1186 influenced in the biotransformation of (E)-2-methyl-3-phenylacrylaldehyde 1. Therefore, marine-derived fungus P. citrinum CBMAI 1186 immobilized on chitosan can be a potential alternative in the studies of hydrogenation of the α,ß-unsaturated carbon-carbon (α,ß-C=C) double bond. Marine-derived fungus Penicillium citrinum CBMAI 1186 immobilized on chitosan in the stereoselective reduction of the C=C double bond of the prochiral (E)-2-methyl-3-phenylacrylaldehyde.

Core-sheath nanostructured chitosan-based nonwovens as a potential drug delivery system for periodontitis treatment.

Core-sheath nanofibers were successfully prepared via coaxial electrospinning by using chitosan with well-defined structural characteristics as the shell layer and poly (vinyl alcohol) (PVA) containing tetracycline hydrochloride (TH) as the core layer. The effects of the average degree of deacetylation (DD‾) of chitosan and the post-electrospinning genipin crosslinking on physicochemical and biological properties of resulting nonwovens were evaluated. Defect-free and geometrically uniform nanofibers with diameters predominantly in the range of 100-300 nm were prepared, and transmission electron microscopy (TEM) revealed the core-sheath structures and its preservation after crosslinking. The mechanical properties, as well as the stability of nonwovens in aqueous medium, were greatly improved by genipin-crosslinking, which enabled a sustained release of TH over 14 days. Results also revealed that the release profile of TH in the presence of lysozyme was affected by the composition of the shell layer, as the TH release rate increases with decreasing of DD‾. Further in vitro antimicrobial activity demonstrated that the cross-linked nonwovens containing TH showed strong activity against bacterial strains associated with periodontal disease. Additionally, the nonwovens did not demonstrate cytotoxic toward fibroblast (HDFn) cells, hence showing their potential for applications as a novel drug delivery platform for periodontitis treatment.

N-(2-Hydroxy)-propyl-3-trimethylammonium, O-Mysristoyl Chitosan Enhances the Solubility and Intestinal Permeability of Anticancer Curcumin.

An amphiphilic derivative of chitosan containing quaternary ammonium and myristoyl groups, herein named as ammonium myristoyl chitosan (DMCat), was synthesized by reacting glycidyltrimethylammonium chloride (GTMAC) and myristoyl chitosan (DMCh). The success of the modification was confirmed using Fourier-transform infrared spectroscopy (FTIR) and ¹H nuclear magnetic resonance (NMR) spectroscopy. The average degrees of alkylation and quaternization ( D Q ¯ ) were determined by using ¹H NMR and conductometric titration. The zeta potential of the micelles was higher than 28 mV while its average size and encapsulation efficiency ranged from 280 nm to 375 nm and 68% to 100%, respectively. The in vitro cytotoxicity of the unloaded and curcumin (CUR)-loaded micelles was tested against Caco-2 and HT29-MTX intestinal epithelial cell lines. The results showed no cytotoxic effect from loaded and unloaded micelles as compared to free CUR. In the permeability test, it was observed that both types of micelles, i.e., DMCh and DMCat, improved CUR permeability. Additionally, higher permeability was verified for both systems in Caco-2/HT29-MTX:Raji B because of the mucoadhesive character of chitosan and its ability to open tight junctions. The results indicated that DMCat micelles, due to the physico-chemical, improved characteristics may be a promising carrier to encapsulate CUR aiming cancer therapy.

Investigation of the Internal Chemical Composition of Chitosan-Based LbL Films by Depth-Profiling X-ray Photoelectron Spectroscopy (XPS) Analysis.

Chitosan-based thin films were assembled using the layer-by-layer technique, and the axial composition was accessed using X-ray photoelectron spectroscopy with depth profiling. Chitosan (CHI) samples possessing different degrees of acetylation ([Formula: see text]) and molecular weight ([Formula: see text]) produced via the ultrasound-assisted deacetylation reaction were used in this study along with two different polyanions, namely, sodium polystyrenesulfonate (PSS) and carboxymethylcellulose (CMC). When chitosan, a positively charged polymer in aqueous acid medium, was combined with a strong polyanion (PSS), the total positive charge of chitosan, directly related to its [Formula: see text], was the key factor affecting the film formation. However, for CMC/CHI films, the pH of the medium and [Formula: see text] of chitosan strongly affected the film structure and composition. Consequently, the structure and the axial composition of chitosan-based films can be finely adjusted by choosing the polyanion and defining the chitosan to be used according to its DA and [Formula: see text] for the desired application, as demonstrated by the antibacterial tests.

Self-aggregates of 3,6-O,O'-dimyristoylchitosan derivative are effective in enhancing the solubility and intestinal permeability of camptothecin.

The aim of this work was to investigate the potential of a new 3,6-O,O'-dimyristoyl derivative amphiphilic chitosan (DMCh), in improving the solubility of camptothecin (CPT), a hydrophobic anticancer drug, and its potential oral delivery. FTIR, 1H NMR and solid-state 13C NMR spectroscopy were used to characterize DMCh and to determine its average degree of substitution (DS¯=6.8%). DMCh/CPT micelles size ranged from (281-357nm), zeta potential (+32-50mV) of encapsulation efficiency of 42-100%. The in vitro cell viability showed that DMCh/CPT micelles were able to reduce the toxicity of CPT. The in vitro permeability of CPT through Caco-2 and Caco-2/HT29-MTX intestinal models was increased up to ten fold when formulated into DMCh micelles, underlining the mucoadhesive properties of the nanocarrier. DMCh/CPT micelles are able to enhance CPT solubility and bioavailability while reduce its cytotoxicity, showing the great potential for intestinal delivery of hydrophobic drugs.

Gladius and its derivatives as potential biosorbents for marine diesel oil.

The demand for low cost and effective materials to remove contaminants such as residues of oil spills has encouraged studies on new biosorbents produced from wastes. Considering the overgeneration of fishing residues and the necessity to provide an alternative purpose for such materials, this study aimed to evaluate squid gladius and its derivatives (ß-chitin and chitosan) as sorbents to remove marine diesel oil (MDO) from fresh and artificial seawater. It was also executed an attempted to improve their performances through a high-intensity ultrasound treatment (UT-gladius and UT-ß-chitin). All sorbents removed MDO at both salinities. Contact surface area, salinity, and water retention seemed to play a key role in the outcomes. UT-ß-chitin's performance was significantly superior to ß-chitin's and chitosan's in MDO removal at salinity 0, as well as at salinity 30, where gladius and UT-gladius also excelled. Ultrasound treatment improved the oil removal performance of UT-ß-chitin by increasing its contact surface area. This is the first report on the efficiency of gladius and UT-ß-chitin for such purpose, and brought up huge possibilities and new questions that can lead to the achievement of biosorbents of great efficiency.

PDLLA honeycomb-like scaffolds with a high loading of superhydrophilic graphene/multi-walled carbon nanotubes promote osteoblast in vitro functions and guided in vivo bone regeneration.

Herein, we developed honeycomb-like scaffolds by combining poly (d, l-lactic acid) (PDLLA) with a high amount of graphene/multi-walled carbon nanotube oxides (MWCNTO-GO, 50% w/w). From pristine multi-walled carbon nanotubes (MWCNT) powders, we produced MWCNTO-GO via oxygen plasma etching (OPE), which promoted their exfoliation and oxidation. Initially, we evaluated PDLLA and PDLLA/MWCNTO-GO scaffolds for tensile strength tests, cell adhesion and cell viability (with osteoblast-like MG-63 cells), alkaline phosphatase (ALP, a marker of osteoblast differentiation) activity and mineralized nodule formation. In vivo tests were carried out using PDLLA and PDLLA/MWCNTO-GO scaffolds as fillers for critical defects in the tibia of rats. MWCNTO-GO loading was responsible for decreasing the tensile strength and elongation-at-break of PDLLA scaffolds, although the high mechanical performance observed (~600MPa) assures their application in bone tissue regeneration. In vitro results showed that the scaffolds were not cytotoxic and allowed for osteoblast-like cell interactions and the formation of mineralized matrix nodules. Furthermore, MG-63 cells grown on PDLLA/MWCNTO-GO significantly enhanced osteoblast ALP activity compared to controls (cells alone), while the PDLLA group showed similar ALP activity when compared to controls and PDLLA/MWCNTO-GO. Most impressively, in vivo tests suggested that compared to PDLLA scaffolds, PDLLA/MWCNTO-GO had a superior influence on bone cell activity, promoting greater new bone formation. In summary, the results of this study highlighted that this novel scaffold (MWCNTO-GO, 50% w/w) is a promising alternative for bone tissue regeneration and, thus, should be further studied.

Synthesis and characterization of 3,6-O,O'- dimyristoyl chitosan micelles for oral delivery of paclitaxel.

The aim of the present study was to investigate the potential application of 3,6-O,O'- dimyristoyl chitosan DMCh, an amphiphilic derivative of chitosan, for improving the oral bioavailability of paclitaxel (PTX), a water insoluble anticancer drug. The O-acylation of chitosan with myristoyl chloride was carried out by employing high (≈13.3) or low (2.0) molar excess of chitosan to result in samples DMCh07 and DMCh12, respectively. The successful O-acylation of chitosan was confirmed by FTIR and 1H NMR spectroscopy, the latter allowing also the determination of average degree of substitution (DS). The critical aggregation concentration (CAC) of samples DMCh07 (DS≈6.8%) and DMCh12 (DS≈12.0%) were 8.9×10-3mg/mL and 13.2×103mg/mL, respectively. It was observed by TEM that the DMCh micelles showed spherical shape while DLS measurements allowed the determination of their average size (287nm-490nm) and zeta potential (+32mV to +44mV). Such DMCh micelles were able to encapsulate paclitaxel with high drug encapsulation efficiency (EE), as confirmed by HPLC analyses. Studies on the cytotoxicity of DMCh07 micelles toward Caco-2 and HT29-MTX cells showed that, regardless the PTX loaded, DMCh07 micelles slightly decreased cellular viability at low micelles concentration (≤1µg/mL) while at high concentration (>10µg/mL) PTX-loaded DMCh07 micelles were less toxic toward Caco-2 cells when compared to free PTX. The PTX permeation across Caco-2 monoculture and Caco-2/HT29-MTX co-culture model confirmed the potential of DMCh micelles in improving the intestinal absorption of PTX. These results suggest that DMCh micelles may be a promising carrier to encapsulate PTX aiming cancer therapy.

Silk fibroin organization induced by chitosan in layer-by-layer films: Application as a matrix in a biosensor.

In this paper, we show that chitosan may induce conformation changes in silk fibroin (SF) in layer-by-layer (LbL) films, which were used as matrix for immobilization of the enzyme phytase to detect phytic acid. Three chitosan (CH) samples possessing distinct molecular weights were used to build CH/SF LbL films, and a larger change in conformation from random coils to ß-sheets for SF was observed for high molecular weight chitosan (CHH). The CHH/SF LbL films deposited onto interdigitated gold electrodes were coated with a layer of phytase, with which phytic acid could be detected down to 10-9M using impedance spectroscopy as the principle of detection and treating the data with a multidimensional projection technique. This high sensitivity may be ascribed to the suitability of the CHH/SF matrix, thus indicating that the molecular-level interactions between chitosan and SF may be exploited in other biosensors and biodevices.

Experimental evidence for the mode of action based on electrostatic and hydrophobic forces to explain interaction between chitosans and phospholipid Langmuir monolayers.

The interaction between chitosans and Langmuir monolayers mimicking cell membranes has been explained with an empirical scheme based on electrostatic and hydrophobic forces, but so far this has been tested only for dimyristoyl phosphatidic acid (DMPA). In this paper, we show that the mode of action in such a scheme is also valid for dipalmitoyl phosphatidyl choline (DPPC) and dipalmitoyl phosphatidyl glycerol (DPPG), whose monolayers were expanded and their compressibility modulus decreased by interacting with chitosans. In general, the effects were stronger for the negatively charged DPPG in comparison to DPPC, and for the low molecular weight chitosan (LMWChi) which was better able to penetrate into the hydrophobic chains than the high molecular weight chitosan (Chi). Penetration into the hydrophobic chains was confirmed with polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) and sum frequency generation (SFG) spectroscopy. A slight reduction in conformational order of the lipid chains induced by the chitosans was quantitatively estimated by measuring the ratio between the intensities of the methyl (r(+)) and methylene (d(+)) peaks in the SFG spectra for DPPG. The ratio decreased from 35.6 for the closely packed DPPG monolayer to 7.0 and 6.6 for monolayers containing Chi and LMWChi, respectively. Since in both cases there was a significant phospholipid monolayer expansion, the incorporation of chitosans led to chitosan-rich and lipid-rich condensed domains, which mantained conformational order for their hydrophobic tails. The stronger effects from LMWChi are ascribed to an easier access to the hydrophobic tails, as corroborated by measuring aggregation in solution with dynamic light scattering, where the hydrodynamic radius for LMWChi was close to half of that for Chi. Taken together, the results presented here confirm that the same mode of action applies to different phospholipids that are important constituents of mammalian (DPPC) and bacterial (DPPG) cell membranes.

Interaction of O-acylated chitosans with biomembrane models: probing the effects from hydrophobic interactions and hydrogen bonding.

One of the major challenges in establishing the mechanisms responsible for the chitosan action in biomedical applications lies in the determination of the molecular-level interactions with the cell membrane. In this study, we probed hydrophobic interactions and H-bonding in experiments with O,O'-diacetylchitosan (DACT) and O,O'-dipropionylchitosan (DPPCT) incorporated into monolayers of distinct phospholipids, the zwitterionic dipalmitoyl phosphatidyl choline (DPPC), and the negatively charged dipalmitoyl phosphatidyl glycerol (DPPG) and dimyristoyl phosphatidic acid (DMPA). The importance of hydrophobic interactions was confirmed with the larger effects observed for DACT and DPPCT than for parent chitosan (Chi), particularly for the more hydrophobic DPPCT. Such larger effects were noted in surface pressure isotherms and elasticity of the monolayers. Since H-bonding is hampered for the chitosan derivatives, which have part of their hydroxyl groups shielded by O-acylation, these effects indicate that H-bonding does not play an important role in the chitosan-membrane interactions. Using polarization-modulated infrared reflection absorption (PM-IRRAS) spectroscopy, we found that the chitosan derivatives were incorporated into the hydrophobic chain of the phospholipids, even at high surface pressures comparable to those in a real cell membrane. Taken together, these results indicate that the chitosan derivatives containing hydrophobic moieties would probably be more efficient than parent chitosan as antimicrobial agents, where interaction with the cell membrane is crucial.

Low molecular-weight chitosans are stronger biomembrane model perturbants.

The influence from the chitosan molecular weight on its interaction with cell membrane models has been studied. A low molecular weight chitosan (LMWChi) adsorbed from the subphase expanded the surface pressure-area and surface potential-area isotherms of dimyristoyl phosphatidic acid (DMPA) monolayers and decreased the compressional modulus. The expansion in the monolayers and the decrease in the compressional modulus were larger for LMWChi than for a high molecular weight chitosan (Chi). The polymeric nature is still essential for the interaction though, which was demonstrated by measuring negligible changes in the mechanical properties of the DMPA monolayer when the subphase contained glucosamine and acetyl-glucosamine. The results were rationalized in a model through which chitosan interacted with the membrane via electrostatic and hydrophobic interactions, with the smaller chains of LMWChi having less steric hindrance to be accommodated in the membrane. In summary, the activity based on membrane interactions depends on the distribution of molar mass, with lower molecular weight chitosan more likely to have stronger effects.

Synergism between keratinocyte growth factor and carboxymethyl chitosan reduces pericardial adhesions.

BACKGROUND: Mesothelial injury is the pivot in the development of adhesions. An increase in the proliferation of mesothelial cells was verified by in vitro studies with the use of keratinocyte growth factor (KGF). This study investigated the influence of KGF associated with thermo-sterilized carboxymethyl chitosan (NOCCts) in the reduction of pericardial adhesions. METHODS: An induction model of pericardial adhesion was carried out in 24 pigs. Animals were randomly allocated to receive topical application of KGF, KGF + NOCCts, NOCCts, or saline (control). At 8 weeks, intrapericardial adhesions were evaluated and a severity score was established. The time spent to dissect the adhesions and the amount of sharp dissection used, were recorded. Histologic sections were stained with sirius red for a morphometric evaluation using a computer-assisted image analysis system. Cytokeratin AE1/AE3 immunostaining were employed to identify mesothelial cells. RESULTS: The severity score expressed in median (minimum to maximum), in relation to the control group (17 [15 to 18]), was lower in the KGF + NOCCts group (7 [6 to 9], p < 0.01) followed by the KGF group (11.5 [9 to 12], 0.01 < p < 0.05) and the NOCCts group (12 [9 to 14], p > 0.05). The dissection time was significantly lower in the KGF + NOCCts group (7.1 + or - 0.6 vs 33.9 + or - 9.2 minutes, p < 0.001). A significantly less sharp dissection was also required in the KGF + NOCCts group. In the adhesion segment, a decreased collagen proportion was found in the KGF + NOCCts group (p < 0.05). Mesothelial cells were present more extensively in groups in which KGF was delivered (p = 0.01). CONCLUSIONS: The use of KGF associated with NOCCts resulted in a synergic action that decreases postoperative pericardial adhesions in a highly significant way.

Keratinocyte growth factor: a new mesothelial targeted therapy to reduce postoperative pericardial adhesions.

BACKGROUND: Several methods have been utilized to prevent pericardial and retrosternal adhesions, but none of them evaluated the mesothelial regenerative hypothesis. There are evidences that the mesothelial trauma reduces pericardial fibrinolytic capability and induces an adhesion process. Keratinocyte growth factor (KGF) has proven to improve mesothelial cells proliferation. This study investigated the influence of keratinocyte growth factor in reducing post-surgical adhesions. METHODS: Twelve pigs were operated and an adhesion protocol was employed. Following a stratified randomization, the animals received a topical application of KGF or saline. At 8 weeks, intrapericardial adhesions were evaluated and a severity score was established. The time spent to dissect the adhesions and the amount of sharp dissection used, were recorded. Histological sections were stained with sirius red and morphometric analyses were assessed with a computer-assisted image analysis system. RESULTS: The severity score was lower in the KGF group than in the control group (11.5 vs 17, p=0.005). The dissection time was lower in the KGF group (9.2+/-1.4 min vs 33.9+/-9.2 min, p=0.004) and presented a significant correlation with the severity score (r=0.83, p=0.001). A significantly less sharp dissection was also required in the KGF group. Also, adhesion area and adhesion collagen were significantly lower in the KGF group than in the control group. CONCLUSION: The stimulation of pericardial cells with KGF reduced the intensity of postoperative adhesions and facilitated the re-operation. This study suggests that the mesothelial regeneration is the new horizon in anti-adhesion therapies.

Beta-chitin from the pens of Loligo sp.: extraction and characterization.

Recently the squid pens, a rich source of beta-chitin containing low contents of inorganic compounds, have become available in considerable amounts as a refuse of the fishery industries in Brazil. Thus, the aim of this work is to use squid pens from Loligo sanpaulensis and Loligo plei, species found in the Brazilian coast, as the raw material for the extraction of beta-chitin. The squid pens were submitted to the usual sequence of treatments used for chitin extraction - demineralization and deproteinization - but due to its low content of inorganic compounds a two-step alkaline treatment was enough to produce beta-chitin with low contents of ash (< or = 0.7%). Indeed, the low contents of ash and metals, such as Ca (< or = 10.4 ppm), Mg (< or = 2.5 ppm), Mn (< or = 3.1 ppm) and Fe (< or = 1.8 ppm), are lower than those reported in most of the papers found in the literature. Also, the beta-chitin extracted by employing only the alkaline treatment was more acetylated than the other samples prepared in this work. Regardless of the treatment employed for the extraction of the beta-chitin from the squid pens, its infrared spectra and X-ray diffraction pattern presented only minor differences, however they were clearly distinguished from commercial alpha-chitin.